Increasing government regulations around indoor air quality in passenger vehicles and more
stringent automotive OEM standards are driving global demand for a new generation of low
VOC (Volatile Organic Compound) thin attachment solutions. With more than 100 years
of global experience and partnerships across the automotive value chain, 3M puts you in
the driver’s seat with a portfolio of high performance, low VOC tape solutions that meet
demanding global requirements.
 
3M™Low VOC Tapes with Acrylic Adhesive are engineered to expand your design freedom,
so you can focus on the fit and finish of your interior, while meeting vehicle indoor air quality
(VIAQ) standards. The need for more innovative new materials to reduce weight, increase
passenger comfort or create a quieter cabin experience should drive your design thinking,
not the emissions content of your components or attachment methods.
 
3M™Low VOC Scrim Reinforced Transfer Tape 98010LVC and 3M™Low VOC Double
Coated Tissue Tape 99015LVC are designed to meet the emission standards as measured by
both JAMA and VDA 278. These highly engineered tapes are designed for automotive interior
bonding and provide excellent dimensional stability during lamination, making them ideal for
virtually any automotive interior application, including:
 
– Headliner components
– Seat heaters and sensors
– Nameplates and emblems
– Cup holder inserts
– Instrument panels and dash
– Interior door panels
– Armrests and center consoles
– Decorative trim
– Electrical components
– Acoustic attachment
 

3M™Low VOC Scrim Reinforced Transfer Tape 98010LVC

 
98010LVC is a 3.9 mil (0.10 mm) low VOC scrim reinforced transfer tape that provides good dimensional stability for large-area lamination.
 
•Low VOC and Low FOG acrylic adhesive
•Designed to meet JAMA and VDA 278 automotive test methods
and industry standards
•Up to 135 ̊C short-term heat resistance and
good shear strength
3M 98010 LVC tape
 
Adhesive caliper: 3.9 mils (0.10 mm)
Liner: 58 lb white densified kraft, printed 3M Low VOC logo
TS 16949 Certification
IMDS Type: Semi-component
IMDS ID: 585846337
 
 

3M™Low VOC Double Coated Tissue Tape 99015LVC

 
 
 
99015LVC is a 5.9 mil (0.15 mm) low VOC double coated tape with tissue carrier for ease of handling during lamination and excellent die-cutting characteristics.
 
•Low VOC and Low FOG acrylic adhesive
•Designed to meet JAMA and VDA 278 automotive test methods and industry standards
•Up to 200 ̊C short-term heat resistance and good shear strength
 3M low VOC Double Coated Tissue Tape 99015LVC
Adhesive caliper: 5.9 mils (0.15 mm)
Liner: 58 lb white densified kraft, printed 3M Low VOC logo
TS 16949 Certification
IMDS Type: Semi-component
IMDS ID: 506790732
 
 

JAMA

The Japanese Automobile Manufacturers Association (JAMA) along with the Japanese Ministry of Health, Labor and Welfare have established target values for nine substances with defined limits for vehicle indoor air quality (VIAQ).
3M™ Low VOC Tapes with Acrylic Adhesive are designed and engineered to meet the target values set forth by each OEM.
 
 

VDA 278

The German Association of the Automotive Industry (Verband der Deutschen Automobilindustrie) has developed a test method, VDA 278, by which VOC and FOG emissions are measured.
3M™Low VOC Tapes with Acrylic Adhesive are designed and engineered to meet the target values set forth by each OEM.
 
source: 3M.com
more info about adhesive and tapes - selfadhesive.net and automotivetapes.com
 

Leave a Reply

Your email address will not be published. Required fields are marked *